Dewatering of knitted fabrics with a traditional hydro extractor results creases and wrinkles. These can be avoided by installing our GURUSON balloon squeezer. It solves the problem and also brings two semi-continues operations into a single, continues process of extraction and plating. This machine can open, untangle, extract, stretch and well compact knitted fabric continuously in a single operation.
MODEL
- Balloon squeezer with single padder.
- Balloon squeezer with double padder.
BALLOON SQUEEZER MACHINE FOR TUBE KNITTED FABRICS
The magnetic stretcher at the outlet of 2nd. nip performs the functions of width setting and overfeed. The stretcher frames are held in position by magnets, thus avoiding the need to change the stretcher frames for different diameters of the fabrics. Equipped with hole detector sensors, motorized expander, sensors for open & close maximum limits, and controlled by PLC, the magnetic stretcher gives value addition by reducing the manual labor and improving the output quality of the fabric.
GURUSON Squeezer with ultimate technology performs de-twisting, Straightening, Expanding, Relaxing and Hydro Extracting Functions in one continuous process. The machine is fully computerized with automated control system. Auto turn table, fabric in feed system, fabric expander, high absorption technology squeezing rolls and conveyorized plaiter, the GURUSON squeezer guarantees high speed Fabric output without crease and edge marks. The machine is completely made of stainless steel for reliability, hard wear and high impact resistance.
- SALIENT FEATURES
- P.L.C. Touch screen.
- Magnetic stretcher.
- All motor provides with A.C. drives (V.F.D.).
- Turn Table.
- Heigh end auto de twister, with lifter
- Plaiter.
- Gear box Bonfiglioli make (Italy).
- Total body fabricated with stainless steel.
Technical Specification
|
|
---|---|
Power
|
15Kw, 415V, 3Phase, 50Hz.
|
Nip Pressure
|
1st NIO : 0-100 kg/cm2
2nd NIO : 0-20 kg/cm2 |
Working Width
|
12-55 inches
|
Air Consumption
|
400 Lits/Hour
|
Machine Speed
|
1-60m/min
|
Overfeed
|
100% to 150% adjustable
|
Plating Length
|
80cm approx
|